Error: failed to add to cart

3M 6200J Diamond Hand Lap - 2 1/4 in Width x 3 3/4 in Length - 14998

3M 6200J hand lap uses diamond as the abrasive material. 3M incorporates this diamond material into the hand lap forming a grit of 250. The hand lap has a width of 2 1/4 in and length of 3 3/4 in.

Specifications

  • Brand: 3M
  • Abrasive Material: Diamond
  • Grit: 250 µ
  • Length: 3 3/4 in
  • Width: 2 1/4 in
  • Color: Green
  • Package Quantity: 10 hand laps per case
Abrasive Material

Values:

Aluminum Oxide
Aluminum oxide is an artificial abrasive suited for general purpose stock removal and finishing. It is the mostly commonly used abrasive and can be used for most steels and ferrous alloys. Aluminum oxide is slightly softer but tougher than silicon carbide.
Diamond
Diamond can be either natural or manufactured and is one of the hardest abrasive materials. It is commonly used for grinding and polishing stone and very hard steels, and for sharpening other cutting tools.
Silicon Carbide
Silicon carbide is a manufactured material that is extremely hard but brittle. It is commonly used for fast cutting under light pressure, particularly on cast iron, nonferrous metals, and materials such as glass and plastic.
Abrasive Material
Diamond
Diamond can be either natural or manufactured and is one of the hardest abrasive materials. It is commonly used for grinding and polishing stone and very hard steels, and for sharpening other cutting tools.
Grit

Grit is a measurement of the size of abrasive particles embedded in coated abrasives. The most common standards for grit size are the United States CAMI (Coated Abrasive Manufacturers Institute) and the European FEPA (Federation of European Producers of Abrasives). A smaller grit number means larger particles and a coarser grade, while high number grits are used for finer work. Grit is generally a unitless measure but is sometimes measured in microns.

 
Labels
Stock Status